161T Compressor Fix for
"High Center"

On very rare occasions, it is possible the 161T Compressor can become inoperative
do to the flywheel becoming stopped in a "high center" position.

If this happens, and the user has turned on the compressor and only hears a
very low humming sound from the motor, this is the very easy quick fix.

1st, unplug the compressor,
then remove the three screws, as pictured.

Remove the Flywheel Cover, then turn over the Flywheel 3-5 revolutions by hand.
Before reinstalling the Flywheel Cover, you may want to plug in the compressor, and give it a quick test. Be sure
to unplug the compressor again, before reinstalling the Flywheel Cover.