| CLOSE WINDOW |
|
|
|
Model # 2010 Airbrush City™ Mini Airbrush Compressor with Tank - AUTO ON/OFF |
|
| QUALITY
THAT PRODUCES AIR PRESSURE YOU NEED. Small,
compact and light weight, weighing only 11-1/2 lbs., the Model #2010
easily fits on a desk our small work table. The perfect airbrush
compressor for almost any type airbrushing job!
AUTO ON/OFF The Model # 2010 is equipped with automatic shut off. Automatically turns off when air tank reaches 60 PSI. Turns back on when pressure in tank drops below 45 PSI. EASILY ADJUST AIR PRESSURE FROM 0-60 PSI. Need that real low air pressure for cake decorating or facial make-up, nails and more? The easiest adjusting pressure regulator we have. Simply pull up on air pressure adjusting knob, then turn clockwise to increase air pressure, turn counter- clockwise to decrease air pressure. Also use the shut/off valve as a cheater regulator. Allows for fine tuning those real low needed air pressures.EASY DRAIN MOISTURE TRAP / AIR FILTER. Pre-installed filter has simple push button to drain any moisture captured from the compressed air created by air compressor pump. EASY READ PRESSURE GAUGE Simple to read pressure gauge shows what your PSI to the airbrush (when not spraying) and PSI leaving airbrush while spraying. There is a difference on these 2 readings. The size of an air tool determines the amount of air used (cubic feet per minute). The larger demand for air an airbrush has, will in fact lower air pressure reading while spraying. Airbrushes are all different, and require different amounts of air. Just one reason to have an air compressor that will produce a true 60 PSI. STANDARD 1/4" AIRLINE FITTING the Model #2010 has a standard 1/4" fitting. This eliminates the need for a series of air leaking reducers and adapters, that can cause your airbrush to operate improperly or not at all. SUPER QUITE OPERATION - Only 59 db |